One gotcha is the vlan-id setting on the pt-interface, a significant amount of searching was required to determine what this value should be VLAN ID 101 is what Plusnet uses. I used this template configuration to deploy multiple firewalls in a multi-site, retail-type deployment. juniper create vlan interface This interface will be configured with vlan vlan-id 501. The configuration to achieve this static NAT rule has been provided below. , the one you've been editing, with the active configuration, which is also the. Just set any server or PC connected to with any IP within the same range 192.
In certain scenarios, you may want to let traffic without VLAN tag rewriting pass through SRX when VLAN tag rewrite is used at the same time. We will run thru some of these configuration and the gotchas. You can plug a server directly to the new Interface you have just set-up or plug it to a switch, to give you more available ports.
Juniper srx vlan configuration One zone is for a local LAN called admins (administration) on interface ge-0/0/0.
